Table of Contents
Advertisement
Communi
Title
cation No.
0849
0850
f851
0851
f852
0852
f831-
0831-
f838
0838
f841-
0841-
f848
0848
f899
0899
-
FE66
-
FE67
(*1): This parameter is effective by reset. Please reset (power supply reset or f899=1) after changing a set point.
(*2): The factory default setting parameter () does not work for this parameter.
Function
Communication2 time-out
condition selection
Disconnection detection
extended time
Operation
at communication error
by disconnection
Preset speed operation
selection
IO Scanner
Command data
IO Scanner
Monitor data
Network option reset
setting
Add-on option 1 CPU
version (Under side option)
Add-on option 2 CPU
version (Panel side)
Description
0: Disconnection detection
1: When communication mode enabled
2: 1+Driving operation
0.0~100.0 sec.
0: Inverter stop, communication command, frequency
mode open (by cmod, fmod)
1: None (continued operation)
2: Deceleration stop
3: Coast stop
4: Network error (err8 trip)
5: Preset speed operation (by f852 setting)
0:None
1~15:Preset speed operation (by parameter setting)
0: No action
1: FA06 (Communication option command 1)
2: FA23 (Communication option command 2)
3: FA07 (Frequency command, 0.01Hz)
4: FA33 (Torque command, 0.01%)
5: FA50 (Terminal output data from comm.)
6: FA51 (Analog output (FM) data from comm.)
7: FA52 (Analog output (AM) data from comm.)
8: F601 (Stall prevention level, %)
9: F441 (Power running torque limit 1 level, 0.01%)
10: F443 (Regenerative braking torque limit 1 level,
0.01%)
11: F460 (Speed loop proportional gain)
12: F461 (Speed loop stabilization coefficient)
0: No action
1: FD01 (Inverter status 1)
2: FD00 (Output frequency, 0.01Hz)
3: FD03 (Output current, 0.01%)
4: FD05 (Output voltage, 0.01%)
5: FC91 (Inverter alarm)
6: FD22 (PID feedback value, 0.01Hz)
7: FD06 (Input terminal status)
8: FD07 (Output terminal status)
9: FE36 (VI/II input, 0.01%)
10: FE35 (RR/S4 input, 0.01%)
11: FE37 (RX input, 0.01%)
12: FD04 (Input voltage (DC detection), 0.01%)
13: FD16 (Speed feedback (real-time value), 0.01Hz)
14: FD18 (Torque, 0.01%)
15: FE60 (My monitor)
16: FE61 (My monitor)
17: FE62 (My monitor)
18: FE63 (My monitor)
19: F880 (Free notes)
20: FD29 (Input power, 0.01kW)
21: FD30 (Output power, 0.01kW)
22: FE14 (Cumulative operation time, 0.01=1 hour)
23: FE40 (FM terminal output monitor)
24: FE41 (AM terminal output monitor)
0:None
1:Reset option circuit board and inverter
High byte is version. Low byte is revision.
For example, When version number 1, and revision
number 2 is, panel indication becomes with 1.02.
The version of the option with it has equipped can be
checked by using the function of f710 to f718
(standard monitor display selection).
*For details, refer to the inverter instruction manual.
- 11 -
E6581580
Factory
setting
0.0
0.0
0
0
0
0
0
-
-
Advertisement
Table of Contents
