Adding Pci Expansion Cards; Mezzanine Card Installation - Supermicro SUPERSERVER 6028R-TDWNR User Manual

S S
UPER ERVER 6028R-TDWNR User's Manual
5-6

Adding PCI Expansion Cards

PCI Expansion Slots
Two riser cards have been pre-installed in the system to support PCI expansion
cards. The RSC-R2UW-2E8E16+ can support two full-height, half-length PCI-E 3.0
x8 cards and one full-height, half-lenght PCI-E 3.0 x16 card. The RSC-R2UW-E8R-
UP can support one low-profile PCI-E 3.0 x8 card.
Installing a PCI Add-on Card
1. Release the locking tab that corresponds to the slot you wish to populate.
2. Insert the expansion card into the riser card, pushing down with your thumbs
evenly on both sides of the card.
5-10
5-7

Mezzanine Card Installation

For optional SAS 3.0 support, follow the instructions below to install the AOM-
S3108M-H8 mezzanine card into the AOM PCI-E 3.0 slot (JMEZ1).
1. With the serverboard in the chassis, align the mezzanine card with slot
JMEZ1.
BT1
JSXB1_2 BMC
BIOS
LICENSE
SP1 P1_NVME0 P1_NVME1
1
CLOSE 1st
CPU1
OPEN 1st
FAN8
FAN6
2. Using both hands, press the mezzanine card down into the slot.
3. With the mezzanine card securely placed in the slot, insert panhead #6
screws into the three standoff holes and tighten them with a Phillips screw-
driver.
Chapter 5: Advanced Serverboard Setup
Mezzanine Card
LAN2 LAN1 USB4/5(3.0) USB0/1(2.0)
COM1
VGA
I-SGPIO2
JSTBY1
JOH1
IPMI_LAN JWD1 Slot JMEZ1
LAN
BIOS
JBT1
LE2
PCH
X10DDW-i
Rev. 1.10
JF1
CLOSE 1st
CPU2
OPEN 1st
MEZZANINE CARD
MOTHERBOARD
5-11