Front Cover - Follett Horizon Elite HCD1010RHT Installation Instructions Manual

Install front cover to ice machine.
8.1
Install condensing unit
• Complete installation of condensing unit
or connection to rack system.
• Required rack system capacity at 0 F
(-18 C) evaporator (EPR supplied by
installer).
1010N: 7,700 Btu/hr (1940 kcal/hr)
1410N: 10,000 Btu/hr (2519 kcal/hr)
Horizon, Horizon Elite, Maestro, Harmony, Ice Manager, SafeCLEAN, Sani-Sponge and Vision are trademarks of Follett Corporation.
Chewblet, RIDE and Follett are registered trademarks of Follett Corporation, registered in the US.
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
8.2
Install ice machine front cover
➋
• Slide ice machine cover over machine
ensuring that tabs on back of cover
slip under louvers on back of louvered
➊
docking assembly
• Insert and tighten two screws through
cover and into louvered docking assembly
➋
8

Front cover

➊
01113331R00
© Follet Corporation 4/16