Remote Control Description - Runco Reflection DR-300 Owner's Operating Manual

REMOTE CONTROL
The remote control controls all operations of the DR-300. It uses discreet On/Off commands, discrete
source selection commands and other simple controls.
10
1
OFF
POWER
4
VIDEO S-VIDEO RGB/HD
3
COMPONENT
6
SELECT
8
1. OFF: Turns the projector off.
2
2. ON: Turns the projector on.
3. VIDEO: Selects Composite Video
ON
as the source.
5
4. S-Video: Selects S-video as the source.
5. RGB/HD/Component: Selects
RGB/Component (DB15 input) as the source.
7
6. Menu Button: Displays the On-screen menu
for making adjustments or changing settings.
9
7. Select (arrow buttons): When the menu is
displayed, the arrow buttons allow you to select
the menu item you wish to adjust; when in an
adjustment mode, the arrow buttons will allow
you to adjust the level of the selected item.
8. Enter Button: Selects the highlighted menu
item.
9. Cancel Button: Exits the menu(s), or cancels
an adjustment (returns it to its previous value).
10. IR Output LED: Blinks when an infrared
signal is being transmitted.
7