Safety Precautions - Runco Reflection DR-300 Owner's Operating Manual

SAFETY PRECAUTIONS

Please read and observe the following safety precautions when operating your DR-300 projector.
• NEVER UNPLUG THE PROJECTOR WHILE IT IS STILL RUNNING!
The lamp MUST have time to cool- always place the unit in STANDBY and let the fans cool
the bulb before unplugging the unit. Failing to let the lamp cool properly can result in lamp
failure and possible implosion.
• Do not insert any object, especially metal or liquids, into the projector
• Do not place any objects containing water or any other liquid on top of the projector
• Do not place the projector in direct sunlight, near heaters or in extremely dusty or humid
locations
• Do not install the projector outdoors or otherwise exposed to the elements
• Do not place heavy objects on top of the projector
• If a power cord is damaged or frayed in any way, electrical shock and/or fire may result.
Please do not place objects on the power cord, and keep the cord away from heat-emitting
devices. Should a power cord become damaged in any way, please contact your Runco
dealer for a replacement cord.
• Do not remove the cover of the projector for any reason. If any problems arise, please
contact a Runco Dealer or Runco International for service. Removing the cover will void the
warranty.
3