Mode Introduction; Mode 1 - Weighing Mode; Mode 2 - Dual Display Mode - acaia Lunar User Manual

Mode Introduction

Mode 1 - Weighing Mode

• There are two different weighing units in Weighing Mode: gram and ounce. A dot will
appear in the upper right of the LED display and the scale will read 0.000 when weighing
in ounces.
• The LED display shows [ 0.0 ] when the scale is measuring in grams.
• The LED display shows [ 0.000 ] when the scale is measuring in ounces.
• The readability is 0.1 g or 0.002 oz. For high resolution mode, the readability is 0.01 g or
0.0005 oz.
Action
Tare Weight
Switch Mode
Note
To change the weighing unit to either gram or ounce, please see Default Unit Setting in the
Configuration section (p. 12).

Mode 2 - Dual Display Mode

• There are two different weighing units in Dual Display Mode: gram and ounce.
• When the scale is measuring in grams, the LED display shows [ 0:00 0.0 ].
• When the scale is measuring in ounces, the LED display shows [ 0:00 0.00 ].
• If the weight exceeds 2000.00 grams, the scale will display [ _ _ _ _ ].
• The maximum time that can be displayed is 9 minutes and 59 seconds. When the
limit is reached, the timer still goes up to until 999 minutes and 59 seconds. It can be
observed through our iOS/Android App.
Action
Start/Stop/Reset Timer
Tare Weight
Switch Mode
In the Weighing Mode, the scale will only display
weight, in either grams or ounces.
Operation
Tap Tare button
Long press Power button
In the Dual Display Mode, the scale displays [ 0:00 0.0 ]
with a timer (left) and weight (right).
Operation
Tap Power button
Tap Tare button
Press and hold Power button
6