Step 2.
Attach a mounting bracket (item 1 in illustration) to each side of the switch with M4 screws (item 2).
Torque the screws to approximately 2.0 newton‐meters (Nm) ± 0.1 Nm (17.7 inch‐pounds).
Figure 17. Attaching mounting brackets to switch
Step 3.
From the front, slide the switch into the rack at the desired height.
Step 4.
Secure the switch unit to the rack posts with M6 screws (item 3 in illustration), washers (item 6), and
either clip nuts (item 4) or cage nuts (item 5). Torque the screws to approximately 5.7 Nm ± 0.1 Nm
(50 inch‐pounds).
Figure 18. Securing switch to rack posts
Step 5.
Connect all external cables.
26
Lenovo ThinkAgile CP Hardware Installation Guide