Left Slide Rear Installation; Slides - Lenovo ThinkAgile CP 4000 Series Installation Manual

Step 2. Install the slide rails into the rack.
Note: The slide rails are extensible as shown in the following illustration.
Figure 4. Slides
a. Select the first slide rail you want to install.
b. Ensure that the slide rail is shortened to the shortest position.
c. From the front of the rack cabinet, line up the pins on the rear of the slide rail with the flange
holes at the rear of the rack.
d. Push the slide rail so that the pins and the latch snap into place.
Note: The holes on the rack will either be square-shaped or round-shaped.
Figure 5. Left slide rear installation
.
Chapter 2 Setting up ThinkAgile CP
13