Step 2.
Install the ThinkAgile CP storage enclosure.
CAUTION:
Ensure that at least two people lift and install the enclosure together.
a.
Remove both of the side covers on the enclosure by grasping and pulling out the bottom of
each side cover, and then pulling it straight up.
Figure 13. Removal of side cover
b.
Lift the enclosure and slowly place the enclosure on the rail.
c.
Carefully slide the enclosure into the rack along the rails until the enclosure is fully inserted.
Figure 14. Installing the enclosure into the rack
d.
Secure the enclosure with the thumbscrews and the M5 screws on the front.
.
Chapter 2
Setting up ThinkAgile CP
19