GPS HUD
Model: HUDGPS1
Features and Specifications
Vehicle driving speed display
●
Over speed warning
●
Speed warning alarm Mute
●
Speed unit km/h and Mile/h switch
●
Speed digit display : Green color
●
Working Voltage: 9~ 28 Vdc
●
Power Consumption: 100 mA (typ.)
●
Operating Temp.: -20C~85
●
GPS HUD
Contents:
● GPS HUD unit
● Power Connector
● Projection Sticker Tape
● Base unit bracket
Clean area of windscreen where
reflective film is to be positioned.
Spread some soap water onto
reflective film after peeling & affix
onto windscreen, and remove
excessive water.
Head-up display for Global Positioning System
QUICK START GUIDE
℃
INSTALLING THE GPS HUD
Take the power Cigar-plug connector plug
into the power Cigar-outlet of your vehicle
and other side to HUD unit.
Power Connector
Push Red button at power connector to get
the IGN Voltage and then switch on the HUD
device.
INSTALL THE HUD UNIT
Fig.1
Locate a suitable surface to position the
HUD unit on to the dashboard.
Adjust the HUD angle to obtain the
optimum viewing position. The angle
stand on the HUD is removable and can
be moved to
location on the dashboard.
Fig.2
accommodate various