Runco Reflection CL-700 Owner's Operating Manual page 24

5. T IN T : Adjust color tones (0 ~ 30). T he higher the setting, the picture becomes greenish. T he lower the setting, the
picture becomes purplish.
6. C O LO R T EMP.: Adjust the color temperature.
0 : T he default color temperature of lamp.
1 : Low color temperature (6500°K ): Video Standard.
2 : Middle color temperature (9000°K ): Makes the white color normal.
3 : High color temperature (11500°K ): Makes the white color bluish.
7. FILT ERS: T urn on /off the video filters. T his could reduce the noise in the picture to get sharper picture. T here are
4 filters for video input (0 ~ 3) and 2 filters for graphic input (0 ~ 1). Higher the setting, the less the noise.
8. RED: Adjust red color independently (0 ~ 30). Higher the setting, the greater the red color intensity. And lower the
setting, lower the red color intensity.
9. GREEN : Adjust green color independently (0 ~ 30). Higher the setting, the greater the green color intensity. And
lower the setting, lower the green color intensity.
10. BLUE: Adjust blue color independently (0 ~ 30). Higher the setting, the greater the blue color intensity. And lower
the setting, lower the blue color intensity.
11. YELLO W : Adjust yellow color independently (0 ~ 30). Higher the setting, the greater the yellow color intensity.
And lower the setting, lower the yellow color intensity.
12. W HIT E: Adjust the white color independently (0 ~ 10). Higher the setting, the greater the white color intensity.
And lower the setting, lower the white color intensity.
DISPLAY Setting Page
In this Menu Page, you could set the way how the projector display the picture.
T here are 5 Menu Items in this page: SO URC E — ASPEC T — PC &HDT V — SAVE — LO AD.
1. SO URC E: Select the input source.
VIDEO : C omposite video signal input.
S-VIDEO : S-Video signal input
C O MPO N EN T : C omponent Y/C
C O MPO N EN T HD: DT V Y/P
RGB HD: DT V RGBHV signal input
PC : C omputer signal input PC
RUNCO CL-700
/C input
B R
/P input
B R
19
5. Menu