Removing The Fan Motor - Mitsubishi Electric MXZ-2F33VF-E1 Service Manual

Outdoor unit, hfc utilized, r32
Hide thumbs Also See for MXZ-2F33VF-E1:
Table of Contents

Advertisement

OPERATING PROCEDURE

. Removing the fan motor

3
(1) Remove the service panel (Photo 1).
(2) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(3) Remove the top panel, the cabinet, and the back panel
(Photo 1, 2, 3).
(4) Disconnect connectors CN712, CNF1, CNTH1, CNTH2,
CN63H, CN791, CN792, CN793, CN794 (MXZ-4F72VF),
CN797 on the outdoor control P.C. board and disconnect
the relay connector of the compressor lead wire.
(5) Remove the screws of the electrical box assembly, and
remove the electrical box assembly (Photo 4).
(6) Remove the propeller fan.
(7) Remove the fan motor.
4. Removing the compressor and the 4-way valve
(1) Remove the service panel (Photo 1).
(2) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(3) Remove the top panel, the cabinet, and the back panel
(Photo 1, 2, 3).
(4) Recover gas from the refrigerant circuit.
NOTE: Recover gas from the pipes until the pressure
gauge shows 0 kg/cm
(5) Disconnect the outdoor control P.C. board connectors:
CN712, CNF1, CNTH1, CNTH2, CN63H, CN791,CN792,
CN793, CN794 (MXZ-4F72VF), CN797.
(6) Disconnect the compressor lead wire from the terminal of
the compressor (U, V, W).
(7) Remove the screws of the electrical box assembly, and
remove the electrical box assembly (Photo 4).
(8) Remove the propeller fan.
(9) Remove the sound proof felt *1, *2 and *3 (MXZ-3F54VF).
NOTE: Before removing the sound proof felt, remove
the hook-and-loop fastener of the top felt by the
power receiver.
(10) Remove the screws of the separator, and remove the
separator.
(11) Detach the brazed parts of the compressor suction and
discharge pipes.
(12) Remove the compressor nuts and remove the compres-
sor.
(13) Detach the brazed parts of the 4-way valve and pipe.
OBH790
2
(0 MPa).
91
PHOTOS
Photo 8
Screws of the outdoor fan motor
Propeller fan Propeller
Separator Sound
fan nut
Photo 9
Hook-and-loop
fastener
Photo 10
R.V. coil
Sound
Compressor nuts
proof
felt *2
Sound
proof felt *1
proof felt *3
(MXZ-
3F54VF)
Power receiver
4-way valve
LEV coil R
Expansion valve R
Discharge pipe
brazed part
Suction pipe
brazed part

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents