Removing The Line Flow Fan And The Indoor Fan Motor - Mitsubishi Electric Mr.Slim MSZ09UN Service Manual

OPERATING PROCEDURE

5. Removing the line flow fan and the indoor fan motor

(1) Remove the front panel. (Refer to 1.)
(2) Remove the electrical box. (Refer to 3.)
(3) Pull out the drain hose from the nozzle assembly, remove
the nozzle assembly.
(4) Remove the hexagon socket set screw from the line flow
fan.
(5) Remove the screws fixing the fan motor, remove the fan
motor.
(6) Remove the screws fixing the left side of the heat
exchanger.
(7) Lifting the left side of the heat exchanger.
(8) Remove the line flow fan.
Photo 6
Screws fix-
ing the left
side of the
heat
exchanger
Photo 7
Indoor coil
thermistor
Screws of the fan motor
63
PHOTOS