Acer Altos G300 Series User Manual page 161

13 Attach the Cable Arm
The optional Cable Arm keeps peripheral and power cables from
becoming tangled or severed when the system slides in or out.
(1) Attach the cable arm to the back of the server with two
screws.
(2) Install two cage nuts in the rail to which the cable arm is to
be attached. Extend the cable arm enough to attach it to
the rail using two M6 x L10 screws.
(3) Insert the power, peripheral and networking cables into the
appropriate ports. Refer to Chapter 2 for detailed
instructions.
149