If your VX-3000d is equipped with a CineWide with AutoScope system, connect the
AutoScope lens motor to a 12-volt trigger output on the DHD Controller; see Figure 3-21.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger outputs.
AutoScope Lens Motor
Power
AC Input
Switch
3.5-mm
mini plug
Retractable Screen or other
12-volt trigger-activated
device
Figure 3-21. Connecting 12-volt Trigger Outputs
VX-3000d Series Installation/Operation Manual
Sleeve = Ground
Tip = +12V
47
Installation
Connecting 12-volt
Trigger Outputs to
External Equipment