Foscam C1 Lite User Manual page 61

CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please
don't upgrade the firmware unnecessarily. Your camera may be damaged if misconfigured during an
upgrade.
NOTES:
Please ensure you have download the correct firmware package for your camera before upgrading.

Read the upgrade documentation (readme.txt file) in the upgrade package before you upgrade.
Upon downloading the firmware check the sizes of the .bin files. They must match the size in the

readme.txt file. If not, please download the firmware again until the sizes are the same. Your
camera will not function correctly if a corrupt .bin file is used.
Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device System

Firmware.
Never shut down the power of the camera during upgrade until the IP camera restart and get

connected.
After upgrade successfully, please uninstall the old plugin and re-install it, then reset the camera to

the default factory settings before using the camera.
Figure 4.1
59