Foscam C1 Lite Quick Installation Manual

Instructions
1
Quick Installation Guide
Package Contents
IP Camera
Quick Installation Guide
Security Warning
Foscam cameras and NVRs require good security
practices to safeguard your privacy. You should
regularly change your camera or NVR password which
Model: C1 Lite
is 8-10 numbers, letters, symbols combination.
You should update your camera or NVR regularly. Make
sure your camera or NVR has the latest rmware
V1.0
installed for your speci c model and better experience.
EQC00006
Hardware Introduction
2
Power light
AC Adapter
USB Power Cable
Quick Installation Guide
Model: C1 Lite
Warranty Card
Download Foscam APP
3
To install the Foscam APP on your smartphone, you can
choose either of the following methods:
Lens If you have a QR Code APP on your phone, scan the
code below.
Microphone
Network light
Micro SD Card Slot
Foscam
You can simply go to the App Store or Google Play Store
and search for the term "Foscam". Find the app that
appears with the same icon as shown above, and
download it to your device.
WPS/Reset
SoftAP
Power
Before you continue, please note:
Make sure your wireless router is enabled DHCP feature,
and connected to internet.
Make sure your smartphone is connected to your
wireless router and located near the camera.
Wireless Connection Wireless Connection
4 4
-1 -2
You can add the Foscam camera using a smartphone.
My Cameras
Add New Camera
WiFi
Tap '+' to add new camera
Router
1. Connect the power adapter to the camera. Then the
camera will play a sound "Ready for WiFi con guration" ,
It indicates that the camera is in EZLink mode.
Run the Foscam APP , and then register for a
2.
Foscam account. After logging in, please follow bellow
steps to add your camera.
Note:
If your device fails to connect to the Wi-Fi using the
Setup Wizard, you can also use WPS mode or the SoftAP
connection. Please refer to the User Manual on the
Foscam website at http://www.foscam.com.
Setup Wizard Scan
Scan the
Please scan the QR code on
Tap here Tap here
your camera to add. Please put the QR code within the frame. Put the
barcode outside the frame to avoid interference.
QR code
Tap to scan QR Code
Album
Setup Wizard
EZLink EZLink
QR Code UID
NPU5YHSZSADVC59D111ABZZZ
Connect your phone to Wi-Fi and input Wi-Fi The camera will
password for camera to connect.
WLAN: √ play a sound
doc
Enter your Wi-Fi Connection succeeded！ "Wireless
Tap the camera in the list to
WLAN Password: watch live video.
password. 轻触扫描二维码
Connection
Succeed" .
Tap here
CONNECT