Foscam C1 Quick Installation Manual

1
Installation Notice
Package Contents
Quick Installation Guide
Indoor HD IP Camera
IP Camera AC Adapter
Quick Installation Guide
Indoor HD IP Camera
Model: C1
Quick Installation Guide
Warranty Card
Security Warning
Please change the password of your camera regularly,
and use the combination of numbers, letters and special
Model: C1
characters.
We recommend you to update your camera to the latest
You can download the QIG in other languages from
firmware every three months, in order to ensure the
http://www.foscam.com/download/QIG.html .
safety of your camera and have a better product
experience.
V1.7
Please keep the username and password of your camera
safe, and do not tell them to others.
2
Physical Description
Front View
PIR
Lens
Infrared LED
USB Power Cable Microphone
Power light Network light
Micro SD Card Slot
Rear View
WPS/Reset
LAN
SoftAP
Power
3 4
Download APP Add IP Camera
To install the Foscam APP on your smartphone, you can
There are two methods, wired and wireless connection, for
choose either of the following methods:
you to add IP camera via Foscam APP. You can choose
either of them:
Scan QR code
If you have a QR Code APP on your smartphone, scan
4.1 Wired Connection(Recommended)
the code below.
Foscam
Download from App store
You can search the term "Foscam" directly on the APP
1. Connect the camera with power adapter, and wait for a
Store or Google Play Store. Then find the APP that
moment, until the camera plays a sound "Hello, Foscam".
appears with the same icon as shown above, and install
2. Connect the camera with router by Ethernet cable, and
it to your smartphone.
then the camera will play a sound " Wired connection
succeed".
Before you continue, please note:
3. Make sure your smartphone is connected to your wireless
Make sure your wireless router is enabled DHCP, and
router.
connected to internet.
4.
Run the Foscam APP
Make sure your smartphone is connected to your a Foscam Cloud account then log in. Please follow the
wireless router and located near the camera.
steps below to add your camera.
My Cameras Setup Wizard Scan
Add New Camera
Please scan the QR code on
Please put the QR code within the frame. Put the
Tap here your camera to add. Tap here
barcode outside the frame to avoid interference.
Tap '+' to add new camera
Tap to scan QR Code
Album
Setup Wizard
√ Connection
Connection succeeded！ succeeded!
Tap the camera in the list to
轻触扫描二维码 watch live video.
Note:
If you have added your IP camera successfully by wired connection,
on your smartphone, register
please do not add it again by wireless connection.
4.2 Wireless Connection
Scan the
QR code
WiFi
WPS
Note:
Do not connect the camera with router via Ethernet cable.
1. Connect the camera with power adapter, and wait for a
moment, until the camera plays a sound "Hello, Foscam".
2. Make sure your smartphone is connected to your wireless
router.
3. Run the Foscam APP on your smartphone, register
a Foscam Cloud account then log in. After the camera
plays a sound "Ready for WiFi configuration", please
follow the steps below to add your camera.