Foscam C Lite Quick Installation Manual

1
Instructions
Quick Installation Guide
Package Contents
IP Camera
Quick Installation Guide
Security Warning
Please change the password of your camera regularly,
and use the combination of numbers, letters and special
characters.
We recommend you to update your camera to the latest
firmware every three months, in order to ensure the
Model: C1 Lite
safety of your camera and have a better product
experience.
Please keep the username and password of your camera
V1.0
safe, and do not tell them to others.
EQC00006
2
Hardware Introduction
Power light
AC Adapter USB Power Cable
Quick Installation Guide
Model: C1 Lite
Warranty Card
3
Download APP
To install the Foscam APP on your smartphone, you can
choose either of the following methods:
Scan QR code
Lens
If you have a QR Code APP on your smartphone, scan
Microphone
Network light
the code below.
Micro SD Card Slot
Foscam
Download from App store
You can search the term "Foscam" directly on the APP
Store or Google Play Store. Then find the APP that
WPS/Reset appears with the same icon as shown above, and install
SoftAP
it to your smartphone.
Power
Before you continue, please note:
Make sure your wireless router is enabled DHCP, and
connected to internet.
Make sure your smartphone is connected to your
wireless router and located near the camera.
4
Wireless Connection
You can add the Foscam camera using a smartphone.
My Cameras
Add New Camera
WiFi
Tap '+' to add new camera
Router
1. Connect the camera with power and wait for a moment,
until the camera plays a sound "Hello, Foscam".
2. Make sure your smartphone is connected to your
wireless router.
3.
Run the Foscam APP on your smartphone, register a
Foscam Cloud account then log in. After the camera
plays the sound "Ready for WiFi configuration", please
follow the steps below to add your camera.
Note:
If your device fails to connect to the Wi-Fi using the
Setup Wizard, you can also use WPS mode connection.
Please refer to the User Manual on the Foscam website
at http://www.foscam.com.
Setup Wizard Scan
Scan the
Please scan the QR code on
Please put the QR code within the frame. Put the
Tap here your camera to add. Tap here
barcode outside the frame to avoid interference.
QR code
Tap to scan QR Code
Album
Setup Wizard
EZLink EZLink
QR Code UID
NPU5YHSZSADVC59D111ABZZZ
Connect your phone to Wi-Fi and input Wi-Fi The camera will
password for camera to connect.
WLAN:
√
play a sound
doc
Connection succeeded！
Enter your Wi-Fi "Wireless
Tap the camera in the list to
WLAN Password:
watch live video.
password. 轻触扫描二维码
Connection
Succeed" .
CONNECT Tap here