Foscam C2 Quick Installation Manual

1
Installation Notice
Package Contents
Quick Installation Guide
Indoor FHD IP Camera
IP Camera
Warranty Card
Security Warning
Please change the password of your camera regularly,
and use the combination of numbers, letters and special
Model: C2
characters.
We recommend you to update your camera to the latest
You can download the QIG in other languages from
firmware every three months, in order to ensure the
http://www.foscam.com/download/QIG.html .
safety of your camera and have a better product
experience.
V1.4
Please keep the username and password of your camera
safe, and do not tell them to others.
2
Physical Description
Front View
AC Adapter USB Power Cable
Quick Installation Guide
Indoor FHD IP Camera
Quick Installation Guide
Rear View
LAN
3
Download APP
To install the Foscam APP on your smartphone, you can
choose either of the following methods:
PIR
Scan QR code
If you have a QR Code APP on your smartphone, scan
Lens
the code below.
Induction IC
High-Power IR LED
Micro SD Card Slot
Foscam
Download from App store
You can search the term "Foscam" directly on the APP
Store or Google Play Store. Then find the APP that
appears with the same icon as shown above, and install
it to your smartphone.
WPS/Reset
Power/Network light
Before you continue, please note:
Power
Make sure your wireless router is enabled DHCP, and
connected to internet.
Make sure your smartphone is connected to your
wireless router and located near the camera.
4
Add IP Camera
There are two methods, wired and wireless connection, for you to
Please note:
add IP camera via Foscam APP. You can choose either of them:
The camera has a 1080P video output. Make sure you have
4.1 Wired Connection(Recommended)
a much smoother video experience on the smartphone. It
recommends that the smartphone has the following
configuration:
IOS: system version 8.1 and above.
1. Connect the camera with power and wait for a moment, until
Android: systetem version 4.1 and above, and the the camera plays a sound "Hello, Foscam".
smartphone has a Graphics Processing Unit (GPU) 2. Connect the camera with router by Ethernet cable, and then
the camera will play a sound " Wired connection succeed".
function.
3. Make sure your smartphone is connected to your wireless router.
4. Run the Foscam APP
Cloud account then log in. Please follow the steps below to add
your camera.
My Cameras
Add New Camera
Tap '+' to add new camera
Tap here
Note: If you have added your IP camera successfully by wired
connection, please do not add it again by wireless connection.
on your smartphone, register a Foscam
Setup Wizard
Scan Setup Wizard
Please scan the QR code on
your camera to add.
Please put the QR code within the frame. Put the
barcode outside the frame to avoid interference.
√
Connection succeeded！
Tap the camera in the list to
Tap to scan QR Code watch live video.
轻触扫描二维码
Album
Tap here Scan the QR code Connection succeeded!