Table of Contents
Advertisement
ELECTRICAL INSTALLATION
4.3.2.2.2 Ech2o 5 Installation
Connect as follows:
• Red: to inputs 1 – 11; jumper 0 – 5V (In the picture below, Red is attached to Terminal 9.)
• Black to +5V
• Bare to COM
WARNING! TO ENSURE INTERFERENCE AND LIGHTNING IMMUNITY, USE SHIELDED
CABLE ONLY (22 AWG MINIMUM)!
WARNING! POWER AND SIGNAL WIRES MUST BE IN SEPARATE CABLES!
NMC-PRO Installation Manual
Page
30
Advertisement
Table of Contents
