Installing And Removing The Battery - Jitterbug Flip User Manual

Installing and Removing the Battery

IMPORTANT!
The battery has been pre-installed into your Jitterbug phone for your
convenience.
Removing the Battery
1. If your Jitterbug is on, turn it off by holding down the On/Off Button (
2. With the back of the Jitterbug facing up, find the Battery Cover Release at
the bottom-left corner.
3. Using your fingernail, gently lift the Battery Cover up using the Battery
Cover Release.
4. To remove the Battery, use your fingernail in the groove at the top of the
Battery, and gently pull the Battery out.
106
).