Battery; Charging The Battery - Jitterbug Touch 2 User Manual

1.1 Battery

Your Jitterbug Touch 2 comes with the battery pre-installed
and pre-charged so you can get started right away.

Charging the Battery

1. With the symbol on the
charger facing up and your
phone's touch screen facing
down, insert the small end of
the charger into the micro-
USB port on the phone.
2. Insert the large end of the
charger cord into the port on
the wall adapter.
3. Plug the adapter into a standard outlet.
The battery icon in the upper right of the
screen tells you whether the device is:
- Charging (the icon is animated)
- Partially charged
- Fully charged
User Guide 10