Jitterbug Flip User Manual page 109

Turning Bluetooth On and Off
The following procedure is applicable to all Bluetooth compatible devices. You
must have your Jitterbug set to "Bluetooth ON" to use any Bluetooth device.
1. From the Main Screen, use the Up/Down Buttons (
appears highlighted and press the YES Button (
2. Use the Up/Down Buttons (
press the YES Button (
3. Use the Up/Down Buttons (
and press the YES Button (
When your Jitterbug is set to "Bluetooth ON," you will see the Bluetooth symbol
in the top-right corner of the Main Screen. Pressing the YES Button (
again on "Bluetooth ON" will switch Bluetooth off.
) until you see "Bluetooth" highlighted and
).
) until you see "Bluetooth OFF" highlighted
).
) until "Settings"
).
)
99