Philips 170S5FG/00 Service Manual page 15

17'' tft lcd colour monitor
Hide thumbs Also See for 170S5FG/00:
Table of Contents

Advertisement

Allowed TV PAL signal mode specified
TV PAL Mode, this mode can be adjusted and saved.
Dot rate (MHz)
H freq (KHz)
27.000
31.25
3. POWER SUPPLY (Buy in power board)
3.1 Setup the AC I/P at 90VAC, add 2.6A loading to +12V O/P and DC
O/P voltage is 12V +/- 1.2V, 1A loading to 3.3V O/P and DC O/P
voltage is 3.3V +/- 0.165V, 1.5A loading to 5V O/P and DC O/P
voltage is 5V +/- 0.5V (B).
3.2 Check voltage at 3.3V O/P should be within the range 3.3V +/-
0.165V. 5.0V O/P should be within the range 5.0V +/- 0.5V
12V O/P should be within the range 12V +/- 1.2V
4. Display Adjustment
4.1 Access to factory mode (RS232) in auto-alignment system
The communication protocol switch to RS232 .
4.2 Auto color adjustment (B)
Apply a 640 * 480 /60Ht z signal with 16 level grey pattern, set
brightness control at 100%, and contrast control at 50%.
Adjust the R. G. B offset, and gain to calibrate the color smoothly
and 64-gray level distinguishable.
4.3 Adjustment of WHITE-D (B)
Apply a 1280*1024/ 60Hz signal with white pattern, set
brightness control at 100%, and contrast control at 50%.
Adjust the R, G, B Sub-Gain, for the screen center, the
1931 CIE chromaticity (X, Y) co-ordinates shall be;
9300°K
0.283 ± 0.008
x (center)
0.297 ± 0.008
y (center)
Use Minolta CA-110 for color coordinates and luminance check.
Luminance is > 200 Nits in the center of the screen when
brightness at 100% and contrast set to 100%.
4.4 Adjustment of sRGB
Apply a 1280*1024/ 60Hz signal with white pattern, set
brightness control at 100%, and contrast control at 50%. Adjust
the R, G, B Sub-Gain, for the screen center, the 1931 CIE
chromaticity (X, Y) co-ordinates shall be;
Electrical Instructions Mode
Mode
Resolution
V freq (Hz)
TV PAL
688*556
50
(B)
6500°K
0.313 ± 0.008
0.329 ± 0.008
4.5 EEPROM presetting (B)
After finishing all the adjustment, set:
Brightness control to 100%
Contrast control to 70%
OSD position at middle of screen
COLOR ADJUST to 6500K color.
4.6 W hen adjustment is finished, monitor should be set to 6500K
Color
x (center)
y (center)
Ynits
170S5 LCD
15
Go to cover page
sRGB
0.313 ± 0.008
0.329 ± 0.008
180 ± 10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents