Philips 170S5FG/00 Service Manual page 55

GENERAL PRODUCT SPECIFICATION
According to VESA power saving signal. TCO03 power saving requirement
EPA energy star requirement
(Power Switch Off)
For digital input power consumption is less 1W
(In non-DMPM recoverable off mode)
3.6 Display identification
3.6.1 In accordance with VESA Display Channel Standard V1.0 and
having DDC-2B capability.
4.0 Visual characteristics
4.1 Test conditions
Unless otherwise specified, this specification is defined under the
following conditions.
(1) Input signal: As defined in 3.3, 1280 x 1024 non-interlaced mode
(2) Luminance setting: Contrast 50% , brightness :100%
(3) Warm up: more than 30 minutes after power on with signal
supplied.
(4) Ambient light: 400 -- 600 lux.
(5) Ambient temperature: 20 +/- 5 °C
4.2 Resolution
Factory preset modes (15 modes)
# Resolution
1 640X350
2 720X400
3 640X480
4 640X480
5 640X480
6 800X600
7 800X600
8 800X600
9 832X624
17 inch LCD Monitor
TYPE : 170S5FG/00
BRAND : PHILIPS
2004-01-16
JERRY CHEN
2004-01-16
(80K/75Hz), signal sources must have 75 ohm
output impedance.
H-Frequency Pixel rate V-Frequency
31.5KHz 25.175
31.5KHz 28.322
37.5KHz 31.501
35.0KHz 30.24
31.5KHz 25.175
35.2KHz 36
46.9KHz 49.498
37.9KHz 40
49.7KHz 57.28
24
170S5 LCD
Go to cover page
Comment
70Hz IBM VGA 10h
70Hz IBM VGA 3h
75Hz
67Hz
60Hz
56Hz
75Hz
60Hz
75Hz MAC
8639 000 15092
590 15
55