Setting in the master station
Connect the engineering tool to the CPU module on the master station and set parameters.
Setting
Master station (station No.0)
1.
Set the CPU module in the following item.
[Project] [New]
2.
Click the [Setting change].
Click the [Setting change] button.
3.
Add the module labels of the CPU module.
"Module Label" "Operation Setting" "Use Module Label" [Yes] Click the [OK] button.
Local station (station No.1)
Local station (station No.2)
7 OPERATION EXAMPLES
7.2 Communication Examples of the RD77GF
7
79