Mitsubishi Electric MELSEC iQ-RD77MS2 User Manual page 69

Wiring products
The following describes the devices used for CC-Link IE Field Network. For reference products of Ethernet cables and
recommended products of hubs, refer to the following.
Page 95 Component List of the RD77GF
■Ethernet cable
Use the Ethernet cable that meets the following standards.
Ethernet cable
Category 5e or higher, straight cable (double shielded, STP)
■Hub
Use hubs that meet all the conditions listed below. Operation is not guaranteed if the hubs do not meet these conditions.
• Compliance with the IEEE802.3 (1000BASE-T)
• Support of the auto MDI/MDI-X function
• Support of the auto negotiation function
• Switching hub (layer 2 switch)
*1 A repeater hub is not available.
Connector
RJ45 connector
*1
Standard
The following conditioning cables:
• IEEE802.3 (1000BASE-T)
• ANSI/TIA/EIA-568-B (Category 5e)
6.3 Wiring of the RD77GF
6
6 WIRING
67