Configure Ddns - HIKVISION DS-7116HQHI-K1 User Manual

(Optional) Check Custom and enter the server address as needed. The default server
address is dev.hik-connect.com.
(Optional) Check Enable Stream Encryption and verification code will be required for
remote access and live view.
Click Apply.
 After configuration, you can access and manage your devices through Hik-Connect app or
www.hik-connect.com.
 For more detailed instructions of Hik-Connect, please refer to the help on
connect.com.

Configure DDNS

Purpose
You can set Dynamic DNS service for network access. Different DDNS modes are available:
DynDNS, PeanutHull, and NO-IP.
Before You Start
You must register DynDNS, PeanutHull and NO-IP services with your ISP before configuring DDNS
settings.
Go to System > Network > TCP/IP > DDNS.
Check Enable.
Select DynDNS under DDNS Type.
PeanutHull and NO-IP are also available under DDNS Type, and required information should be
entered accordingly.
Enter Server Address for DynDNS (i.e. members.dyndns.org).
Under Device Domain Name, enter the domain name obtained from the DynDNS
website.
Enter the User Name and Password registered in the DynDNS website.
Network Video Recorder User Manual
165
www.hik-