Replacing A Front Turn Signal Light Bulb; Replacing A Rear Turn Signal Light Bulb - Yamaha Exciter T150 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a front turn signal
light bulb
NOTICE
It is advisable to have a Yamaha
dealer perform this job.
1. Place the vehicle on the center-
stand.
2. Remove panel A and B. (See page
7-7.)
3. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
7
1
1. Turn signal light bulb
4. Remove the burnt out bulb by
pulling it out.
5. Insert a new bulb into the socket.
EAUV0560 6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the panels.
ECA10671
7-33
Replacing a rear turn signal
light bulb
1. Remove the rear turn signal lens
by removing the screw.
1
1. Screw
2. Remove the burnt-out bulb by
pulling it out.
1
1. Turn signal light bulb
EAUU1121