Adjusting The Engine Idling Speed - Yamaha Exciter T150 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
7. Install the seat by installing the
seat pin.
8. Install the panel.
7
Adjusting the engine idling
speed
The engine idling speed must be
checked and, if necessary, adjusted as
follows at the intervals specified in the
periodic maintenance and lubrication
chart.
The engine should be warm before
making this adjustment.
Check the engine idling speed and, if
necessary, adjust it to specification by
turning the idle adjusting screw. To in-
crease the engine idling speed, turn
the screw in direction (a). To decrease
the engine idling speed, turn the screw
in direction (b).
(b)
(a)
1
1. Idle adjusting screw
7-15
EAU34302
Engine idling speed:
1300–1500 r/min
TIP
If the specified idling speed cannot be
obtained as described above, have a
Yamaha dealer make the adjustment.