Tail/Brake Light; Replacing A Front Turn Signal Light Bulb - Yamaha Aerox GDR155 Owner's Manual

Periodic maintenance and adjustment
1
1. Auxiliary light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
9

Tail/brake light

This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
9-31
EAU24182
Replacing a front turn signal
light bulb
1. Place the vehicle on the center-
stand.
2. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
1. Turn signal light bulb socket
3. Remove the burnt-out bulb by
pulling it out.
EAU43054
1