Sony BRAVIA KDL-48W655D Operating Instructions Manual page 26

Advanced Settings
Dynamic Range: Compensates for
differences in the audio level
between different channels.
Note
• The effect may not function or may vary
depending on the program regardless of the
[Dynamic Range] setting.
Dolby Digital Plus Out: Select [Auto] to
pass through Dolby Digital Plus
stream to ARC when Dolby Digital
Plus is available through connected
Audio System.
During Dolby Digital Plus stream is
output, Digital Audio Out (optical)* is
muted.
Select [Off] to convert Dolby Digital
Plus stream to Dolby Digital for both
ARC (Audio system) and Digital Audio
Out (optical)*.
HE-AAC Audio Level: Adjust the HE-
AAC audio sound level.
MPEG Audio Level: Adjusts the MPEG
audio sound level.
* Only on limited region/country/TV model.
Screen
Wide Mode
For details about wide mode, see page 19.
Auto Wide
Automatically changes the wide mode
according to the input signal from an
external equipment.
4:3 Default
Sets the default [Wide Mode] for a 4:3
input signal.
Auto Display Area
Select [On] to automatically adjusts the
display area based upon the content or
[Off] to choose from the [Display Area]
options.
Display Area
Adjusts the picture display area.
26
US
H Center
Adjusts the horizontal position of the
picture.
V Center
Adjusts the vertical position of the picture.
Vertical Size
Adjusts the vertical size of the picture
when [Wide Mode] is set to [Wide Zoom].
PC Settings
Adjust the picture size, see page 19.
Channel Setup & Ginga
Cable/Antenna
Cable: Select if you are receiving cable
channels via Cable TV provider.
Antenna: Select if you are using an
antenna.
Auto Program
Automatically sets up the channel list on
the TV for all receivable channels.
Select [Auto Program].
Select [OK] to automatically sets up the
channel list.
Add Digital Channels
Select [Add Digital Channels].
Select [OK] to add digital channels.
Show/Hide Channels
Allows you to show or hide channels that
appear when you use the CH +/– buttons.
Press / to scroll through the channels
until you find the channel you want to
show or hide. Then press
Press / to determine if the channel will
be shown or hidden. Then press
select it.
to select it.
to