Precautions
5.11 Drive Ass'y
1. Before you remove the Drive Ass'y, you should
remove:
- Rear Cover (see page 5-2)
2. Unplug the two connectors.
(Main Motor : 10 pin, Duplex Motor : 4 pin)
Service Manual
5-18
3. Disconnect the fan harness from the Main PBA.
Remove one screw and take out the Fan and Dust
Fan.
4. Remove four screws (2 screws securing ground wires
and 1 screw securing the Zener PBA) and take out
the Drive Ass'y. taking care not to damage the Zener
PBA.
Fan
Dust Fan
Driver Ass'y
Samsung Electronics