Duplex Jam; Bypass Tray Jam; Optional Tray2 Jam - Samsung SCX-6320F/XEC Service Manual

Digital laser mfp
Table of Contents

Advertisement

Alignment & Adjustments

6.2.6 Duplex Jam

If paper jam occurs in the duplex mechanism, "Duplex Jam" appears on the display.
1) Press the release lever to open the side cover.

6.2.7 Bypass Tray Jam

"Bypass Jam" appears on the display when you try to print using the Bypass Tray and the machine does not
detect paper due to no paper or improper paper loading.
"Bypass Jam" also may occur when the paper is not properly fed into the machine through the Bypass Tray. In that
case, pull the paper out of the machine.

6.2.8 Optional Tray2 Jam

If paper is jammed in the optional tray2, 'Jam0 In Tray2' appears on the display.
1) Pull the paper Tray to open. After you pull it out
completely, lift the front part of the Tray slightly up
to release the Tray from the machine
Service Manual
6-8
2) Remove the jammed paper. Then close the side
cover
2) Remove the paper in the direction shown. To
avoid the paper torn, pull it out gently and slowly.
Samsung Electronics

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scx-6320f

Table of Contents