Programming - Hunter Pro-C Controller Product Information

PROGRAMMING

Programming the Controller
Two key features of the Pro-C that make
programming a snap are its clear, easy-to-read
LCD display and its easy-to-use dial design.
The Pro-C display shows time and day
when the controller is idle. The display
changes when the dial is rotated to indicate
the specific programming information to enter.
When programming, the flashing portion of
the display can be changed by pressing the
or buttons. To change something that is
not flashing, press or until desired field
is flashing.
The Pro-C controller offers maximum
scheduling flexibility including three
programs, each with up to 4 daily start times,
permitting plants with different watering
requirements to be separated on different
day schedules. Multiple start times permit
morning, afternoon and evening watering,
perfect for the establishment of new lawns
and thirsty annual flowers. A built in
365-day calendar clock accommodates
odd/even watering restrictions without
requiring monthly reprogramming. Or, just
simply designate the days of the week you
want to water or use the convenient day
interval watering.
NOTE: A basic programming rule is that whatever
symbol or character is flashing will be the item
programmed. For instance, if the hour is flashing
when setting the time, the hour can be changed
or programmed. For illustration purposes,
flashing characters are in Gray type.
Setting the Current Date and Time
1. Turn the dial to the
SET CURRENT
DATE/TIME
position.
2. The current year
will be flashing
in the display. Use the
and buttons to
change the year. After
setting the correct year,
push the button to
proceed to setting the month.
Pro-C Controller
3. The month and day
will be in the display.
The month will be
flashing. Use the
and buttons to
change the month. Press the
proceed to setting the day.
4. The day will be
flashing: Use the
and buttons to
change the day of the
month (The day of
the week is automatically selected.) Press
the button to proceed to setting the time.
5. The time will be
displayed: Use the
and buttons
to select AM, PM,
or 24 hr. Press the
button to move to hours. Hours will
be flashing. Use the
to change the hour shown in the display.
Press the button to move onto minutes.
Minutes will be flashing. Use the
buttons to change the minutes shown in the
display. The date, day, and time have now
been set.
Setting Watering Start Times
1. Turn the dial to the SET WATERING
START TIMES position.
2. The factory preset is set on program A.
If necessary you can select program B or C
by pressing the
3. Use the and
buttons to change
the start time.
SET CURRENT
DATE / TIME
(Advances in
15-minute incre-
ments.) One start time will activate all
stations sequentially in that program. This
eliminates the need to enter a start time
for each station. Multiple start times in a
program can be used for separate morning,
afternoon, or evening watering cycles.
button to
and buttons
and
button.
17