Hunter Pro-C Controller Product Information page 6

FEATURES AND BENEFITS
Intuitive Dial Programming
For easy program entry
For contractors and homeowners alike, the
Pro-C provides step by step programming.
No complicated entry functions or repetitive
keystrokes. Just turn the dial to the section
of the program that needs to be changed and
use the plus, minus and next buttons to make
the adjustments. No other programming
method is easier.
Removable Front Panel for
Remote Programming
Set the controller up without having to
stand in front of it
A removable hinge design
allows easy removal of
the front panel without
disturbing field wiring.
With the use of a 9-volt
battery, you can set the
program away from the
cabinet location. This
timesaving feature allows the contractor to
program before going out to the job (also
serves as a great sales demo when talking to a
potential client). The contractor can also give
the homeowner the front panel while the job
is being installed to allow the homeowner to
try the programming functions early on. When
it comes time to actually set up the controller,
the homeowner is completely clued in, making
the whole programming process a very
simple one.
4
(continued)
3 Programs (A, B, C) with
Multiple Start Times
Different watering requirements are met
with independent programming
The Pro-C allows for many different
irrigation applications using three completely
independent programs. This is ideal for
various types of plants that have separate
watering day requirements. Each program has
the ability to water up to four start times per
day. The user has complete flexibility with
watering schedules for new seed or sod lawns,
multiple cycles for low infiltration-rate soils,
slopes, morning or evening irrigation and other
watering window restrictions.
Up to Six-hour Station Run Times
Allows accurate watering for all types of
plant material
Each station will operate up to six hours of run
time in any or all three programs. Run times
from 0-120 minutes program in one-minute
increments and then in ten-minute increments
up to six hours. The factory default for all
stations is set at 0 minutes to eliminate any
unneeded stations before programming.
Note: Using the water budget feature, station
run times may only be increased to a
maximum of 6 hours.
Choice of Independent Day
Scheduling Options
Days of the week or 31-day interval for
maximum flexibility
The watering day
schedules in programs
A, B or C may be set up
independently from each
other. In each program,
the choice of Custom (day
of the week), Interval (up to 31-days), Odd or
Even days may be selected. This allows the
user to water on certain days of the week such
as Monday, Wednesday and Friday or water on
a repeating day cycle (Interval) such as every
third day, or odd/even days in any or all three
of the programs.