1210 Rear-facing camera module and camera cable
Before you replace the rear-facing camera module and camera cable, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 54.
2. Remove the Nano-SIM-card and microSD card tray, nano-SIM-card, and microSD card. See "Removing
the Nano-SIM-card and microSD card tray, nano-SIM-card, and microSD card" on page 54.
3. Remove the following FRUs:
• "1010 Back cover assembly and LCD module" on page 55
• "1020 Speaker assembly" on page 61
• "1030 Built-in battery" on page 63
• "1090 Thermal module" on page 69
• "1190 System board" on page 79
Removal steps of the rear-facing camera module and camera cable
When installing: Ensure that the connector is attached firmly.
1220 Antenna kit
Before you replace the antenna kit, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 54.
2. Remove the Nano-SIM-card and microSD card tray, nano-SIM-card, and microSD card. See "Removing
the Nano-SIM-card and microSD card tray, nano-SIM-card, and microSD card" on page 54.
3. Remove the following FRUs:
• "1010 Back cover assembly and LCD module" on page 55
• "1020 Speaker assembly" on page 61
• "1030 Built-in battery" on page 63
• "1090 Thermal module" on page 69
• "1190 System board" on page 79
82
X1 Tablet Gen 3 Hardware Maintenance Manual