Step
Screw (quantity)
4
M1.6 × L2.5 mm, flat-head, nylon-coated (4)
Note: Do not close the connector flip before connecting the cable. When connecting the cable, ensure that
the connector is attached firmly.
1060 Hall sensor cable
Before you replace the hall sensor cable, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 54.
2. Remove the Nano-SIM-card and microSD card tray, nano-SIM-card, and microSD card. See "Removing
the Nano-SIM-card and microSD card tray, nano-SIM-card, and microSD card" on page 54.
3. Remove the following FRUs:
• "1010 Back cover assembly and LCD module" on page 55
• "1020 Speaker assembly" on page 61
• "1030 Built-in battery" on page 63
66
X1 Tablet Gen 3 Hardware Maintenance Manual
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)