Lenovo THINKPAD X1 Tablet Gen 3 Hardware Maintenance Manual page 53

Table 4. System board connector and cable guide (continued)
Item
Connector (location)
16
Audio card connector (internal)
17
Speaker connector (internal)
18
Hall sensor connector (internal)
19
USB-C connector (external)
20
USB-C connector (external)
21
Nano-SIM-card and microSD card
slot
Audio card connector and cable
Table 5. Audio card connector and cable guide
Item Connector (location)
1
Audio connector (external)
Internal cable required
Audio-card cable
Speaker assembly cable
Hall sensor cable
No
No
No
Internal cable required
No
Cable connection
The audio card comes with a
cable. Connect the cable to this
connector.
The speaker assembly comes with
a cable. Connect the cable to this
connector.
The Hall sensor comes with a
cable. Connect the cable to this
connector.
Connect an HDMI-compatible
audio device or video monitor, a
video graphics array (VGA) monitor
or other VGA-compatible video
device, or an ac power adapter to
this connector by using a USB-C
dongle or docking device. Or,
connect an ac power adapter
directly to this connector.
Connect an HDMI-compatible
audio device or video monitor, a
video graphics array (VGA) monitor
or other VGA-compatible video
device, or an ac power adapter to
this connector by using a USB-C
dongle or docking device. Or,
connect an ac power adapter
directly to this connector.
Insert a tray with a microSD card
to this slot to transfer or store files.
If the computer supports wireless
WAN, insert a tray with a nano
Subscriber Identification Module
(SIM) card into this slot to establish
wireless-WAN connections.
Cable connection
Connect headphones or a headset
with 3.5-mm (0.14-inch) 4-pole
plug to this connector.
.
Chapter 5 Locations
47