1050 Pogo Card And Pogo-Card Cable - Lenovo THINKPAD X1 Tablet Gen 3 Hardware Maintenance Manual

1050 POGO card and POGO-card cable

Before you replace the LCD and touch controller card cable, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 54.
2. Remove the Nano-SIM-card and microSD card tray, nano-SIM-card, and microSD card. See "Removing
the Nano-SIM-card and microSD card tray, nano-SIM-card, and microSD card" on page 54.
3. Remove the following FRUs:
• "1010 Back cover assembly and LCD module" on page 55
• "1020 Speaker assembly" on page 61
• "1030 Built-in battery" on page 63
Removal steps of the POGO card and POGO-card cable
.
Chapter 7 Removing or replacing a FRU
65