2. Remove the Nano-SIM-card and microSD card tray, nano-SIM-card, and microSD card. See "Removing
the Nano-SIM-card and microSD card tray, nano-SIM-card, and microSD card" on page 54.
3. Remove the following FRUs:
• "1010 Back cover assembly and LCD module" on page 55
• "1020 Speaker assembly" on page 61
• "1030 Built-in battery" on page 63
• "1090 Thermal module" on page 69
Removal steps of the M.2 solid-state drive and solid-state-drive mylar
Step
Screw (quantity)
2
M2 × L2.5 mm, flat-head, nylon-coated (1)
1160 USB-C connector bracket
Before you replace the USB-connector bracket, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 54.
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 7
Removing or replacing a FRU
75