Lenovo THINKPAD X1 Tablet Gen 3 Hardware Maintenance Manual page 76

2. Remove the Nano-SIM-card and microSD card tray, nano-SIM-card, and microSD card, and kickstand.
See "Removing the Nano-SIM-card and microSD card tray, nano-SIM-card, and microSD card" on page
54.
3. Remove the following FRUs:
• "1010 Back cover assembly and LCD module" on page 55
• "1020 Speaker assembly" on page 61
• "1030 Built-in battery" on page 63
Removal steps of the thermal module
Note: Do not close the connector flips before connecting the cable. When connecting the cable, ensure that
the connector is attached firmly.
3a
Loosen the screws to
70
X1 Tablet Gen 3 Hardware Maintenance Manual
3i
in ascending alphabetical order as shown in the following illustration.