Performing with a Song
1.
Press the Mode switch to turn the "PLAY" light on.
2.
Select a music category by pressing the corresponding
number button [1] to [10].
The selected number button will light up and the corre-
sponding song will be automatically selected.
1
NOTE
The score (PDF) is available at the Yamaha website:
https://download.yamaha.com/
After accessing the Support website (and clicking on "Man-
ual Library"), enter the appropriate model name.
3.
Press the [
] button to start the song.
4.
Play the pads with the song.
NOTE
If you wish to mute the programmed drum parts and hear
only the song parts, press the [DRUM ON/OFF] button. To
unmute the drum parts, press the [DRUM ON/OFF] button
once again.
5.
To stop the song, press the [
Performing with a Selected Music Category
2
] button once again.
Adjusting the Song Volume
While holding the [
] button, press either the VOL-
UME[+] or VOLUME[–] button.
Hold
Lower song
•
Each time you press the VOLUME[+] button, you
increase the song volume by one.
•
Each time you press the VOLUME[–] button, you
decrease the song volume by one.
NOTE
The set volume is common to the drum module's ten songs.
DTX402K DTX432K DTX452K Owner's Manual
Basic Techniques
Higher song
volume
volume
27