4.
Select a new metronome sound using the corresponding
number button [1] to [7].
Number button
[1]
Metronome click 1
[2]
Metronome click 2
[3]
Cowbell
[4]
Drumsticks
[5]
Claves
[6]
Spoken count 1
[7]
Spoken count 2 (with measure number)
1-4. Number Button Lighting Pattern
Steps:
Hold down the Mode switch [1] [4] Setting
You can have number buttons [1] to [10] light up when play-
ing the metronome in Play Mode. Use the following proce-
dure to set the buttons' lighting pattern.
1.
Hold down the Mode switch to activate Menu Mode.
2.
Press number button [1] to select the Metronome Set-
tings parameter group.
3.
Press number button [4] to select the Number Button
Lighting Pattern parameter.
4.
Select a new lighting pattern using the corresponding
number button [1] to [3].
Number button
[1]
Off (no lighting)
[2]
Pattern 1
[3]
Pattern 2
Setting Parameters using Menu Mode
Setting
Setting
Setting
x Kit Settings
2-1. Pad Sound
Steps:
Hold down the Mode switch [2] [1] Setting
You can change the sounds assigned to the current kit's
pads. This makes it very easy to create your own unique
kits.
1.
Hold down the Mode switch to activate Menu Mode.
2.
Press number button [2] to select the Kit Settings
parameter group.
3.
Press number button [1] to select the Pad Sound
parameter.
4.
Strike a pad to select it.
5.
Enter a new drum-sound number using the TEMPO[+]/
[–] buttons. For a list of sounds and numbers, see the
Voice List (page 62).
Setting
1 to 287
2-2. Pad Volume
Steps:
Hold down the Mode switch [2] [2] Setting
You can adjust the volume of the kit's pads.
1.
Hold down the Mode switch to activate Menu Mode.
2.
Press number button [2] to select the Kit Settings
parameter group.
3.
Press number button [2] to select the Pad Volume
parameter.
4.
Strike a pad to select it.
5.
Enter a new volume using the TEMPO[+]/[–] buttons.
Setting
0 to 127
DTX402K DTX432K DTX452K Owner's Manual
Advanced Techniques
Setting
Setting
43