Viewing a JPEG File
The recorder can play JPEG files. Before playing
JPEG recordings, read "Photo file requirement" on
1. Press HOME.
The HOME menu appears.
2. Select [PHOTO] option.
3. Select a media that contains JPEG file then press
The [Photo List] menu appears on the TV screen.
4. Use v / V to select a file, then press ENTER.
The menu options appear on the left side of the
If you want to move to the upper directory, use the
v / V to highlight
and press ENTER.
You can also display HOME menu to select another
media by pressing HOME.
5. Use v / V to select [Full Screen] then press
The selected image is displayed in full screen.
Depending upon the size and number of JPEG
files, it could take a long time for the recorder to
read the files.
Press ENTER to appear or disappear this menu
during viewing the full screen.
6. To stop viewing at any time, press STOP.
The [Photo List] menu appears.
Photo List menu options
1. Press v / V to select a file on the [Photo List]
menu then press ENTER.
The menu options appear.
The menu options displayed differ depending on
the selected media.
Selecting multiple files (folders)
1. Press MARKER.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
2. Repeat step 1 to mark additional file (folders).
2. Use v / V to select an option then press ENTER
to confirm your selection.
[Open] Opens the folder and a list of files in the
[Full Screen] Shows the selected file as full
[Slide Show] Displays Slide Show menu.
Photo file requirement
Less than 4MB recommended
ISO 9660 and JOLIET.
ISO 9660 (UDF Bridge format)
Less than 999 (total number of files and folders)
Notes on JPEG file
Progressive and lossless compression JPEG image
files are not supported.