Introduction
1.2 Content of delivery
The delivery of a T5 or T5x includes:
Tensiometer, calibrated and filled, with 4-pin plug M12/IP67, with
plug cap
This manual
Rubber protection cap, filled with water to the half, for keeping
the ceramic moist and clean
For available accessories see chapter "Accessories".
The delivery of a T5-set or T5x-set includes:
Blue plastic transport case
Tensiometer, filled and calibrated, with 4-pin plug M12/IP67,
plug with protective cap
This manual
Rubber protection cap, filled to the half with water to keep
the cup wet and clean
Pack of paper tissues
Polyethylene bottle with 250 ml of water
Filling tube for shafts longer than 10 cm
Evacuation syringe with acrylic adapter for T5 sensor body
Evacuation syringe for T5 shaft
Water reservoir syringe for T5 shaft
Syringe with pipette tip
Spare pipette tip
Gouge auger, diameter 5 mm, length 200 mm
Sensor body auger, diameter 18 mm, length 200 mm
Connecting cable; 1,5 m length
5/48