UMS T5 User Manual page 24

Service and maintenance
3. Insert the ceramic cup into
the tube as far as possible with
the ceramic pointing inside.
The cup's tip should be close to
the syringe nozzle.
Pull up the syringe just a little
bit.Hold the syringe down-wards
and tap on it to loosen all
bubbles.
There should be no air inside
the tube around the ceramic. In
case fill in some water with the
syringe.
4. Take off the tube from the
syringe. Leave the shaft inside
the tube.
Remove all air from the syringe
5. Put the tube back on the
syringe.
24/48