UMS T5 User Manual page 26

Service and maintenance
There should be no air inside the
tube before inserting the shaft
again.
Degas the sensor body
1. Now take the syringe with the
attached sensor body adapter.
Pull up the syringe, but not
further than shortly before the
spacers will snap in.
In case fill in some drops of
water into the tube with the
syringe.
Reattach the syringe and pull it
up until the spacers snap in.
Leave the syringes on the shaft.
2. Hold the syringe upwards
and remove all air.
26/48