Playing A Cassette - Samsung SV-647X Instruction Manual

Playing a Cassette

This function allows you to play back any pre-recorded cassette.
TRK PROG
1
Switch on both the television and your VCR.
2 Insert the video cassette to be played. If the safety tab on the
cassette is intact, press
2 Otherwise, the cassette is played automatically.
3
REC MENU
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
OK the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this VCR.
3
To...
Stop the playback
Eject the cassette
Adjusting Picture Alignment Manually
The Picture Alignment feature allows you to adjust the alignment
TV VCR INPUT
manually to obtain the best possible picture.
REPEAT
When noise bars or streaks appear during playback, adjust alignment
AUDIO DISP./
manually by pressing the PROG/TRK ($ or ❷) buttons until the picture is
VOL PROG/TRK
clear and stable.
Result: The tracking bar appears.
The image is adjusted.
The tracking bar disappears when you release the button.
30
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
❿ II
.
Then press...
(STOP).
(EJECT).
Intelligent Picture Control
1
During playback, press the MENU button on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
2 Press the corresponding ,
$ ❷!
USER SET option.
3 Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding or buttons, until the IPC
$ ❷
selected.
5 Press the ❿!button to select the IPC (intelligent picture control)
option.
When intelligent picture control mode is , the sharpness
ON
of the image is adjusted automatically.
6 To adjust the sharpness manually, press the
❷ button to turn the
IPC mode OFF .
Press the ➛ or ❿ buttons until the picture is displayed according to
7
your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8 On completion, press the MENU button again.
OPTIONS
PROG OPTIONS INSTALL
CLOCK BONUS LANG
USER SET
➛❿!!
OK END: MENU
$ ❷!!
option is
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
❿ END: MENU
$ ❷
PICTURE
** **
IPC : OFF
SOFTEN SHARPEN
-------- * -----
➛❿ ON/OFF:
❷
31
GB